Queen Bed Frame
Other than the fact that Fedex completely was slow at delivering this
product, it arrived undamaged with everything intact. I know there's
people out there who are big. Want to know if this little 100 buck frame
is going to hold all that love without bending or breaking under
stress. I can assure you as I am laying on my mattress supported by this
frame that it is holding sturdy, with no creaks, shakes, or any weird
noises that would come from too much weight. It does what it is intended
to do and it is
SERIOUSLY EASY to assemble. So I will walk you through
it.
First off, you flip out the first part of the section (theres
two identical sections) flat on the floor and open the legs at each
end. There are two support beams that open out with little hooks at the
ends. You will see the two little wingnuts that obiviously have to be
adjusted to slide the hooks under the nuts then tighten the wingnuts
down nice and snug. Do this for the next three legs of the section.
Second,
once you achieve this, make sure that you have enough tightness by
testing the beams by jiggling them to check for any movement. If theres
none, then you're good. If there is, flip back over and retighten.
Recheck and move to the next piece.
Third and Last, once you have
the second section the same way, bring them right next to each other
and attach them using the two long screws in the little bag provided in
the box. The black rubber part is to be placed between the two frames
(unscrew the wingnuts on the ends of these screws and run the plain long
screw through the end of the first section, place black piece on the
end of the screw before going through the other side and slide over).
Grip the frame tight together and use the last little wingnut to screw
snugly at the end. Do this for the other end and you got it.
Enjoy your goodnight's sleep.
Queen Bed Frame
